Siemens optiPoint 400 Manual Do Utilizador
Step by Step
Using Other Functions
78
Using System Functions from the Outside
(DISA: Direct Inward System Access)
(DISA: Direct Inward System Access)
If this function has been configured (contact your serv-
ice personnel), you can set up external outgoing calls
from outside the system, just like an internal user. You
can also activate and deactivate the following functions
in your system:
ice personnel), you can set up external outgoing calls
from outside the system, just like an internal user. You
can also activate and deactivate the following functions
in your system:
•
Reset services and functions,
code: #0
code: #0
•
Call forwarding, code:
*
•
Lock and unlock all phones,
code:
code:
*
66/#66
•
Save PIN,
code:
code:
*
•
Send a message,
code:
code:
*
68/#68
•
Leave an advisory message,
code:
code:
*
69/#69
•
Group ringing, code:
*
81/#81
•
Group call, code:
*
85/#85
•
Suppress caller ID,
code:
code:
*
86/#86
•
Waiting tone, code:
*
87/#87
•
Open door, code:
*
•
Door opener on/off, code:
*
89/#89
•
Control relay, code:
*
•
Do not disturb, code:
*
97/#97
•
Ringer cutoff function, code:
*
98/#98
•
Speed-dialing, code:
*
7
•
Associated service, code:
*
83
Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
o
Set up a call to the system. Enter the station number
(contact your service personnel).
(contact your service personnel).
o
Wait for a continuous tone (if necessary switch the tel-
ephone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
ephone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
r
Enter the code (necessary only if programmed in the
system).
system).