Panasonic KX-TVS80 Manual Do Utilizador
B5
SYSTEM ADMINISTRATION - SERVICE SETTINGS
222
SYSTEM ADMINISTRATOR'S GUIDE
Keypad
Assignment
0-9, , #
Assignment
0-9, , #
a-n
( : d, 0: c
Others: None)
Any of the 14 services listed below (a-n) can be
assigned to the 0 through 9, and # keys on the
telephone keypad. Callers are able to access these
services by pressing the corresponding keys on their
telephones.
assigned to the 0 through 9, and # keys on the
telephone keypad. Callers are able to access these
services by pressing the corresponding keys on their
telephones.
(a) Transfer to Mailbox - Allows the caller to leave
messages in a specific mailbox. Enter "a"
followed by a mailbox number.
followed by a mailbox number.
(b) Transfer to Extension - Transfers the caller to a
specific extension. Enter "b" followed by an
extension number.
extension number.
(c) Operator - Connects the caller to the operator.
(d) Exit - Plays a final guidance message and
disconnects. The message must be recorded by the
Message Manager.
Message Manager.
(e) Previous Menu - If programmed, allows the caller
access to a previous Custom Service Menu.
(f) Custom Service - If programmed, allows the caller
access to another Custom Service.
(g) Voice Mail Service - Allows the caller access to
the Voice Mail Service.
(h) Call Transfer Service - Allows the caller access to
the Automated Attendant Service.
(i) Subscriber Service - Allows the caller access to
Subscriber Service. Available only when calls are
from subscribers.
from subscribers.
(j) Department Dialing - Transfers the caller to the
Department Dialing menu.
(k) Dial by Name - Lets the caller transfer an
extension by dialing the first 3 or 4 letters of the
extension owner's last name.
extension owner's last name.
(l) Repeat Menu - Repeats the Custom Service menu
message.
(m) Main Menu - Lets the caller return directly to the
top Custom Service menu.
(n) FAX Transfer - Enables the caller to send a fax
message to the appropriate extension where a fax
machine is connected.
machine is connected.
Table 45
Parameter
Value Range
(Default)
Description/Function