Panasonic KX-THA11 Manual Do Utilizador
Useful Information
50
For assistance, please visit http://www.panasonic.com/phonehelp
Phonebook
The handset does not
ring.
ring.
L
The ringer volume is turned off. Adjust it (page 31, 42).
I cannot make a call.
L
The dialing mode may be set incorrectly. Change the
setting (page 35).
setting (page 35).
L
The base unit (including answering system) or another
handset is in use. Try again later.
handset is in use. Try again later.
I cannot redial by
pressing {REDIAL}.
pressing {REDIAL}.
L
If the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.
the number will not be redialed correctly. Dial the
number manually.
I cannot have a
conversation using the
headset.
conversation using the
headset.
L
Make sure that a Panasonic optional headset is
connected properly (page 46).
connected properly (page 46).
L
If “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
to switch to the headset.
I cannot make long
distance calls.
distance calls.
L
Make sure that you have long distance service.
I cannot page the
handset or base unit.
handset or base unit.
L
The called handset is too far from the base unit.
L
The called unit is in use. Try again later.
I cannot turn the clarity
booster feature on.
booster feature on.
L
The resources available for wireless communication
(making or answering calls with another handset,
monitoring camera images from a computer, etc.) are
limited. Wait for the other user to end the operation and
try again.
(making or answering calls with another handset,
monitoring camera images from a computer, etc.) are
limited. Wait for the other user to end the operation and
try again.
The interrupt tones sound
while I am on an outside
call or on an intercom call
or monitoring a room.
while I am on an outside
call or on an intercom call
or monitoring a room.
L
A call is being received. Press {OFF} to end the call or
stop monitoring, then answer the call.
stop monitoring, then answer the call.
Problem
Cause & solution
Copying stopped with an
item displayed.
item displayed.
L
The destination handset may have lost communication
with the base unit, or the destination unit user may have
pressed {C} or {s} on the handset or {SP-PHONE}
on the base unit.
The displayed phonebook item was not copied to the
unit. Press {OFF} on the handset. Confirm that the
destination unit is not in use and try again.
with the base unit, or the destination unit user may have
pressed {C} or {s} on the handset or {SP-PHONE}
on the base unit.
The displayed phonebook item was not copied to the
unit. Press {OFF} on the handset. Confirm that the
destination unit is not in use and try again.
Problem
Cause & solution
THA11.book Page 50 Tuesday, March 7, 2006 5:56 PM