Panasonic DBS 824 Manual Do Utilizador

Attendant Features

One-Touch VM Transfer

Revised April 2000

DBS 824-3.0/3.2-700

  2-15

Note: The VM key is assigned differently, depending on whether it is used 
for personal message retrieval or attendant transfer. See the following 
“Operation” section for instructions.

Note: You cannot program this feature if trunks are assigned to the key. First 
clear the FF assignments, then use the following procedures to assign the VM 
key.

1. Press 

the 

ON/OFF key.

• The phone issues intercom dial tone.

• The ON/OFF LED lights.

2. Press 

the 

PROG key.

3.  Press the FF key, DSS key, or One-Touch key.

4. Press 

the 

CONF key.

5. Press 

the 

AUTO key.

6.  Dial the voice mail extension number.

7.  If the key is for personal message retrieval, enter a password (XXX or 

AUTO 00-99) if desired. If the key is for attendant transfer to voice mail, 
do not enter a password but include any special codes (* or #, for 
example) if they are required by the voice mail system. 

Note: The length of the password and the VM extension number cannot 
exceed six digits. If the VM number and the password total more than six 
digits, assign the password to a personal or system speed dial number (00-
99 or 000-199, 900-939).

8. Press 

the 

HOLD key.

1.  The attendant answers an incoming call.

The incoming caller asks to be transferred to an extension number.

2.  The attendant checks the DSS/BLF key for the extension. If the light is 

red, the attendant presses the VM key followed by the DSS/BLF key.