Polycom 2W Manual Do Utilizador
SoundStation2W™ Administrator Guide - 36
►White Noise is a signal
whose energy is distributed uni-
formly among all frequencies
within a band of interest, which
for the SoundStation2W™
formly among all frequencies
within a band of interest, which
for the SoundStation2W™
3. Press the Select button to acti-
vate the signal.
Restore Defaults
Restoring the defaults will irretrievably remove all
settings and data that have been entered since the
SoundStation2W™ was first installed.
settings and data that have been entered since the
SoundStation2W™ was first installed.
1. Press the Menu button, choose
Admin Setup and press the
Select button, enter passcode (if
required) and press the
Select button, enter passcode (if
required) and press the
ENTER
soft
key. Choose Diagnostics using
the Scrolling buttons, and press
the Select button.
the Scrolling buttons, and press
the Select button.
2. Choose Restore Defaults using
the Scrolling buttons, and press
the Select button. Press the
the Select button. Press the
OK
soft key if you wish to restore
defaults or the
defaults or the
CANCEL
soft key
or the Exit button to return to the
Diagnostics submenu.
Diagnostics submenu.
►Phone Book entries and Speed Dial
numbers are not lost when restoring
all defaults.
all defaults.
Software Upgrade
Please refer to the SoundStation2W™ section of the
Polycom website at www.polycom.com for information
on software upgrades.
Polycom website at www.polycom.com for information
on software upgrades.