Nortel Networks M3905 Manual Do Utilizador

  

 

A comma included in the dialing sequence is interpreted as a delay. The default 
delay time is two seconds.

The guard time aids in recognition of the escape sequence, useful since different 
numbers of escape characters mean different things. For example, one Escape 
character is not recognized as a pause until the guard timer expires, indicating no 
other Escape characters were entered as part of the Escape sequence.

This holds the value of the guard time in milliseconds. The value of each digit is 20 
milliseconds. The default value is 50 (one second).

These registers contain the Product Identification code and will output a three digit 
code in response to the “ATI0” command.

Default value is “960” (Smartmodem V-series 9600 modem). Other possible 
values are: “122” (Smartmodem 1200) and “240” (Smartmodem 2400). These 
registers will not be altered by software reset.

A value of zero (0) means only Hayes autobaud is possible. A value of one (1) 
means both Hayes and keyboard dialing autobaud is allowed.

Each increment of S51 represents a 0.25 second delay before outbound modem 
pool activation. Default is 16 (4 seconds). This register will not be altered by 
software reset.