Nortel Networks M7410 Manual Do Utilizador

Página de 148
118  Companion Features
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 02
Problems with lost connections are rare, but if you notice an increase of such 
incidents after making large changes in the layout of your office, your Base Stations 
may need to be moved or reprogrammed to accommodate the new arrangement. In 
this case, contact your installer to change the Base Station configuration. (In the 
U.S. you need to obtain UTAM Inc. approval before making changes to the Base 
Station configuration.) Refer to Enterprise Edge Programming Operations Guide 
for more information.
Using Enterprise Edge features
It is possible to use many of the same Enterprise Edge features available to an 
Enterprise Edge telephone on your portable telephone. The table below lists which 
features are available for use on your portable telephone. For additional information 
on features and the special key sequences required to use them, refer to the feature 
card that is supplied with your portable telephone.
Features supported by Enterprise Edge portable telephones 
Tip
If you try to send a message from a desk telephone to a portable telephone, the 
display of the desk telephone shows Can’t send msg.
Feature
Description
Call Forward
Send calls to another telephone in your Enterprise Edge system. The 
display does not indicate that calls are being forwarded.
Hunt Group calls override all Call Forward features. A Hunt Group DN 
can be a Call Forward destination.
Call Information
Display the name or extension of an internal caller. In addition, if your 
system is equipped to receive CLASS information (Caller ID), the 
external caller is displayed.
Call Park
On your portable, park a call.
Call Park Retrieval
On your portable, retrieve a parked call.
Cancel Call 
Forward
Cancel the Call Forward feature, where calls are automatically sent to 
another telephone in your Enterprise Edge system.
Conference
See your 
Portable Telephone Feature Card.
Directed Call 
Pickup
Answer any telephone that is ringing in your Enterprise Edge system.
Group Pickup
Answer a call ringing on another set in the same pickup group.
Host system 
signaling
Link and pause are available. See “Using System features” on page 95 
for more information.
Line Pool 
On your portable, use line pools the same way a desk telephone does.
Mute
Prevent the person you are on the portable telephone with from 
hearing you. Also, you can mute a portable’s ringing for an incoming 
call.
Page
On your portable, page an individual telephone, several telephones, 
external speakers, or the entire system.
A Hunt Group DN cannot be in a page zone.
Pause
Program in an external autodial sequence to insert a 1.5 second delay.
Prime line
On your portable, may be either an Intercom Line, an Assigned Line or 
a Line Pool.