Nortel Networks M7410 Manual Do Utilizador
28 Answering calls
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 02
Place the telephone so that any unavoidable local noise (such as an air conditioner)
is behind it. This limits the amount of disruptive background noise.
is behind it. This limits the amount of disruptive background noise.
Changing Handsfree for a telephone
You can program the type of Handsfree used with each telephone or activate
Handsfree Answerback.
Handsfree Answerback.
You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge Programming Operations Guide.
information about programming using the Unified Manager, see the Enterprise
Edge Programming Operations Guide.
There are three ways to set Handsfree for an individual telephone:
Both Auto and standard Handsfree allow you to use a headset with an Enterprise
Edge telephone.
Edge telephone.
A Handsfree/Mute button is automatically assigned to a telephone that is
programmed with Handsfree and is always located in the lower right-hand corner
of the telephone.
programmed with Handsfree and is always located in the lower right-hand corner
of the telephone.
Handsfree Answerback
Handsfree Answerback allows you to answer a voice call without lifting the
receiver. It is always turned off for a M7100 telephone.
receiver. It is always turned off for a M7100 telephone.
You can turn Handsfree Answerback on or off for a telephone that is programmed
to use Handsfree.
to use Handsfree.
You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge Programming Operations Guide.
information about programming using the Unified Manager, see the Enterprise
Edge Programming Operations Guide.
Tip
In open-concept environments, use the receiver when handsfree
communication is not necessary or when you need privacy during a call.
Another option is to use a headset.
In open-concept environments, use the receiver when handsfree
communication is not necessary or when you need privacy during a call.
Another option is to use a headset.
Handsfree is not available to the telephone.
You can make or answer a call without having to
pick up the receiver or press
pick up the receiver or press
©
. The
telephone’s internal microphone and speaker turn
on automatically when you press a line or
intercom button to make or answer a call.
on automatically when you press a line or
intercom button to make or answer a call.
A standard version of Handsfree described
For other displays, see
Handsfree:None
CHANGE
CHANGE
Handsfree:Auto
CHANGE
CHANGE
Handsfree:Std
CHANGE
CHANGE