Philips Micro Hi-Fi System MC260 MC260 Manual Do Proprietário

14

3140 115 31971

Select TUNER source.
➜ TUNER is displayed briefly.

Press BAND once or more to select your
waveband.

Press down on TUNING à or á and release
button.
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: 

SEARCH.

➜ If a FM station is received in stereo, 

 is

shown.

Repeat step 3 if necessary until you find the
desired station.

● To tune to a weak station, press TUNING à

or á briefly and repeatedly until you have
found optimal reception.

You can store up to a total of 40 radio stations
in the memory.

Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.

Press PRESET 

3 or 4 (on the remote control

¡ or ™ ) to select the preset number where
programming should start.

Press PROGRAM for more than 2 seconds to
activate programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW and LW. The last
preset automatically stored will then be played.

Tune to your desired station (see “Tuning to
radio stations”).

Press PROGRAM to activate programming.
➜

 flashes in the display.

Press PRESET 

3 or 4 (on the remote control

¡ or ™ ) to allocate a number from 1 to 40 to
this station.

Press PROGRAM again to confirm the setting.
➜

 disappears, the preset number and

the frequency of the preset station are shown.

Repeat the above four steps to store other
stations.

● You can override a preset station by storing

another frequency in its place.