Philips Micro Hi-Fi System MC260 MC260 Manual Do Proprietário

19

3140 115 31971

There are two possible methods for setting the
clock: manually or automatically by using RDS.

Tune to a RDS station (see “Radio Reception”).

Press CLOCK SET for more than 2 seconds.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.

In standby, press CLOCK SET.
➜ The clock digits for the hours flash.

Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.

Press CLOCK SET again.
➜ The clock digits for the minutes flash.

Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.

Press CLOCK SET toº confirm the time.

● The system can be used as an alarm clock,

whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.

● You can also use it to record a favourite tuner

programme at a set period (see “Recording
timer”)

● During setting, if no button is pressed within 90

seconds, the system will exit timer setting mode
automatically.

In any mode, press TIMER ON•OFF for more
than 2 seconds.

Turn VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE or

REC TUNER.

Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source 

 or 

is shown. Display sequence scrolls 

SET ON

TIME and 

 flashes.  The clock digits for the

hours flash.

Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.

Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.

Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.

Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.

● In standby or during playback, press

TIMER ON•OFF once.
➜ Display shows 

 if activated, and

disappears if deactivated.