Clarity C510 Manual Do Utilizador

Flash is a feature that enables you to
answer a call if you have call waiting.
Please contact your local telephone
company for information on subscribing
to this feature. Pressing the FLASH but-
ton while you are having a phone con-
versation will pick up the second con-
versation and place the first call on hold.
Press the FLASH button again to contin-
ue your conversation with the first
caller.

Redial allows you to automatically redial
the last telephone number you called
(up to 32 digits).To use this feature, lis-
ten for dial tone and press the REDIAL
button once. Your call will be dialed.
The last number dialed will be stored in
the Clarity 510 for you until you dial
another phone number or disconnect
the telephone from the wall jack.

The unit includes a 2.5 mm headset jack
for connection of a headset. In  the
headset mode, the volume of the head-
set is controlled adjusting the Clarity
Power Dial.

Press the HEADSET button to enable 
the headset mode. Dial as normal.

The HEADSET button will illuminate 
to indicate the phone is in the 
headset mode.You may switch 
between headset and handset 
usage by toggling the HEADSET 
button.

In the event you wish to purchase a 
headset for your Clarity 510,
please contact Plantronics at 1-800-
544-4660 for location near you.
We recommend using the 
Plantronics M110 headset.

A 3.5 mm jack is available for connect-
ing a neckloop.The volume to the neck-
loop is controlled by the telephone.
When the neckloop is plugged in, the
handset is disabled.

The handset has a special coil inside of
it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.

In the event of a power failure, you can
still make and receive calls, but the LCD
display, CID/PhoneBook operations,
Nightlite, and Extra Loud Ringer will not
function.The phone will ring, but not as
loud.

16