Fujitsu 280D-HS Folheto

Adjusting Your Telephone Ring 
& Pitch (using the blue buttons) 
 
Volume: 
With your phone ON the hook, dial 
#136 
Your phone will begin to ring 
Use the blue UP and DOWN 
arrow keys to adjust to the 
required level 
Press SPKR to save. 
 
Pitch (this will adjust the tune of 
your phone ring to differentiate it 
from other phones in your area) 
 
With your phone on the hook, dial 
#136 
Press 2 
Use the blue UP and DOWN 
arrow keys to adjust to the 
required pitch 
Press SPKR to save. 
 

Note: Ensure that you have the 
“Headset Only” button turned off 
when using this feature 

 

 
Connect your headset to the socket 
underneath your digital phone (labelled  
#2 port – 

) 

Press the 

 button. 

The light will go 

red 

to indicate that you 

are in “headset mode” 
Place the handset on the hook. 
You are now free to use BOTH the 
handset receiver and the headset to 
make or answer calls.  
 
To make an outgoing call via your 
headset: 

Dial out directly from the telephone 
keypad (include 0 as usual if this is 
an outside call) 
You will hear and speak via your 
headset. 

Press the SPKR button to answer a 
call. The 

 button will 

go red. 

Press the 

 button while active on 

a call. The SPKR and LINE buttons will 
go out. 

To Go From Headset to Handset 
      To go from headset to handset during a  

Call. Lift the handset.  
You can now hear the caller through 
both the headset and handset. 

Press the TOGGLE Handsfree” button 
Return the handset to the cradle 
Your 

SPKR

 and 

LINE

 buttons will 

remain lit. 
You will now only hear the caller 
through your headset. 
 

 
Turn off the 

 

button. The light will go out. 
You can now make hands-free calls by 
dialling directly from the keypad. 
To answer a call hands-free, press the 
SPKR button. 
You are free to lift the handset at any 
time, however, to go back to hands-
free, you must press the “TOGGLE 
Handsfree” button before hanging up 
the handset to continue the call hands-
free. 
If you do not press the “TOGGLE 
Handsfree” button first, then…your call 
will be disconnected. 
 

Note:  You cannot turn on the headset 
button or use your headset while on a 
hands-free call.    You cannot go to speaker 
mode (hands-free) while engaged on a 
headset call. 

 
 
 

 
 
 
    
 

 

ADFA