Samsung SCH-i700 Series Manual Do Utilizador
Chapter 14 - ActiveSync
120
The i700 and the PC should perform the first
ActiveSync. This may take some time, depending on
the amount of information that needs to be
synchronized. When the process is complete,
disconnect the data cable from the i700 and close
ActiveSync.
ActiveSync. This may take some time, depending on
the amount of information that needs to be
synchronized. When the process is complete,
disconnect the data cable from the i700 and close
ActiveSync.
Performing ActiveSync using IR
If you do not have your data cable and you need to
perform a ActiveSync operation, you can use the IR
port. To use the IR port to perform an ActiveSync:
perform a ActiveSync operation, you can use the IR
port. To use the IR port to perform an ActiveSync:
1.
On the PC, launch the ActiveSync application.
2.
Click
File
and select
Connection Settings
.
3.
Click the check box next to
Allow serial cable or
infrared connection to this COM port
.
4.
Click the drop down arrow and select
Infrared Port (IR)
.
5.
Click
OK
to close the window.
6.
On the i700, tap
Start
located in the upper left corner of
the screen.
7.
Tap
ActiveSync
.
8.
Tap
Tools
and select
Connect via IR
.
9.
Aim the two devices at each other.