Samsung 100 Manual Do Utilizador

22

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 105

Display shows

2. Dial the station number (e.g., 205) OR 

press UP or DOWN to select the station

and press the right soft key to move the
cursor OR press the left soft key to go
to step 4

3. If the selected station has no speed dial

bins, this display will be shown and a new

station may be selected

sys_screen.qxp  5/11/2006  6:26 PM  Page 29

23

4. Dial the location number (e.g., 05) OR

press UP or DOWN to select the location

and press the right soft key to move the 
cursor OR press the left soft key to return
to step 2

5. Enter the trunk access code (e.g., 9)

followed by the number to be dialed 

(e.g., 4264100) OR press the right 
soft key to return to step 2 OR press the 
left soft key to return to step 3 OR press 
HOLD to clear an entry (if an error is made,
use the DOWN key to step back)

6. Press the F key to access Program Station

Speed Dial Names OR press TRSF to save
and exit programming OR press SPK to save
and advance to the next program

Each individual station user can program his/her own names but in cases where it
is impractical or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial names. The station speed
dial codes are 00–49. Each station begins with ten numbers (00–09) and can be
assigned more in blocks of ten up to a maximum of fifty numbers.

UP & DOWN - Used to scroll through extension numbers and speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.

1. Press TRSF and then dial 106

Display shows

sys_screen.qxp  5/11/2006  6:26 PM  Page 30