Samsung 100 Manual Do Utilizador

28

UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 107

Display shows the first station

2. Dial the station number (e.g., 205) OR use

UP or DOWN to scroll through the station

numbers and press the right soft key to
move the cursor

3. Enter the key number (e.g., 18) OR use

UP and DOWN to scroll through the keys

and use the right soft key to move the 
cursor OR press the key to be programmed

4. Dial the extender according to the list 

above and the system will display your 
selection
If there are no more entries, press
the left soft key to return to step 2

5. Press TRSF to store and exit programming

OR press SPK to store and advance to the 

next program

sys_screen.qxp  5/11/2006  6:26 PM  Page 35

29

This program is used to add or change account code entries.

KEYPAD - Used to enter the account code (allowable digits 0–9).
UP & DOWN - Used to select entry number.
FLASH & TRSF - Used to view and change only the used entries.
SPK/RLS - Used to clear data.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 708

Display shows

2. Dial the account code entry (e.g., 005)

OR press UP or DOWN to select the

entry number and press the right soft 
key to move the cursor

3. Enter the account code via the dial pad,

e.g., 1234 (maximum of 12 digits) and

press the right soft key to move the 
cursor back to step 2

4. Press TRSF to store and exit pro-

gramming OR press SPK to store and 
advance to the next program

sys_screen.qxp  5/11/2006  6:26 PM  Page 36