Samsung 7000 Series Manual Do Utilizador

28

UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 107

Display shows the first station

2. Dial the station number (e.g., 205) OR use

UP or DOWN to scroll through the station

numbers and press the right soft key to
move the cursor

3. Enter the key number (e.g., 18) OR use

UP and DOWN to scroll through the keys

and use the right soft key to move the 
cursor OR press the key to be programmed

4. Dial the extender according to the list 

above and the system will display your 
selection
If there are no more entries, press
the left soft key to return to step 2

5. Press TRSF to store and exit programming

OR press SPK to store and advance to the 

next program

System_Administration_Guide.qxp  4/30/2007  12:56 PM  Page 35