Samsung ITP-5107SIP Manual Do Utilizador

The system provides several tones to assist you. Some of these tones are already
familiar to you.

5

Intercom Dial Tone—A steady tone that indicates you can begin dialing.

DIAL TONE

CONTINUOUS

Ringback Tone—Indicates the station you dialed is ringing.

RINGBACK TONE—1000 ms ON/3000 ms OFF

CONTINUOUS

Busy Tone—Indicates the station you dialed is busy.

BUSY TONE—500 ms ON/500 ms OFF

CONTINUOUS

DND/No More Calls Tone—Fast busy tone indicates the station you dialed
is in the Do Not Disturb mode or cannot receive any more calls.

DND/NO MORE CALLS TONE—250 ms ON/250 ms OFF

FOR TEN SECONDS

Transfer/Conference Tone—Indicates your call is being held and you
can dial another party.

TRANSFER/CONF TONE—100 ms ON/100 ms OFF

CONTINUOUS

Confirmation Tone—Very short beeps followed by dial tone indicate you
have correctly set or canceled a system feature.

CONFIRMATION TONE—50 ms ON/50 ms OFF

FOR ONE SECOND
(programmable)

Error Tone—A distinctive two level beeping tone indicates you have done
something incorrectly. Try again.

ERROR TONE—50 ms of tone 1/50 ms of tone 2

FOR THREE  SECONDS

5107S_keyset.qxp  5/9/2006  9:56 AM  Page 11