Avaya 3600 Series Manual Do Utilizador

 

Overview  The Desktop Charger is a one-slot charger. Model DCE100 is 

designed to charge the BPE100 Battery Pack in the 3616 WT 
and the BPN Battery Pack in the 3620 WT. Model DCX100 is 
designed to charge the BPX100 Battery Pack in the 3626 WT. 
The models are not interchangeable. 

Full charging is accomplished in approximately one and a half 
hours. 

Set up the Desktop Charger by first obtaining the appropriate 
Avaya power supply for the country or region. Place the 
Desktop Charger on a flat, horizontal surface. Plug the power 
supply into the Desktop Charger and into an appropriate wall 
outlet. 

The user must end any call in progress by pressing the 

 

button on the WT before placing the handset into the Desktop 
Charger. The WT may be off or in standby mode during 
charging. 

Indicator light  Place the WT into the Desktop Charger slot facing forward. If 

the WT is placed correctly, the red indicator light will come on. 
The indicator light will not come on when the slot is empty, 
when the WT is improperly seated, or when the Desktop 
Charger has no power applied. 

While the WT is charging in standby mode, it will display 
its extension number and 

 The battery icon will 

show charging progress. The handset is fully operational 
and will ring if called. When the WT is charging while 
turned off, only 

 will display and no calls will 

be received.

 The dots will be racing during the charging cycle. 

It is normal for the Battery Pack to become warm when 
charging. 

21-300632, Issue 1, July 2005 

Page 23