Avaya 3.0.0 Manual Do Utilizador

If someone calls you while you are engaged in a call, you will be alerted to the call by the 
Message Waiting indicator, which begins to flash. In addition, a ringing (

) icon will appear in 

the display beside one of the Line/Feature ( ) buttons. You can put the active call on hold while 
you answer the incoming call. 

1. When information about an incoming call appears in the display, select the Line/Feature 

( ) button that corresponds to the incoming call.

The active call is automatically put on hold. The display shows an associated HELD 
softkey on the right side of the display.

2. Conduct and conclude the new call.

3. To retrieve the held call, select the HELD softkey that corresponds to the held line.

Tip:

You can transfer all incoming calls to another telephone automatically by defining 
call-forwarding rules. For more information, see 

1. With the calling party on the line, press the Transfer (

) button.

2. When you hear the dial tone, dial the number, or select the FrDir softkey and select the 

number from a directory.

3. After the dialed party answers your call, announce the caller.

4. When you are ready to transfer the call, press the Transfer (

) button.

5. Select the Ok softkey.

1. With the calling party on the line, press the Transfer (

) button.

2. When you hear the dial tone, dial the number, or select the FrDir softkey and select the 

number from a directory.

3. When you hear the telephone at the far end begin to ring, hang up.

The Call Park-Retrieve feature lets you “park” a call that can then be retrieved from any other 
Quick Edition IP telephone in the one-X Quick Edition network.