Avaya 4620SW Manual Do Utilizador

Note:

The 4630 IP Telephone does not support IEEE-standard power, and therefore 
requires the Power Module.

The 4690 IP Conference Telephone is powered with a special LAN/power cable 
with a power interface module included with this phone. 

 

10. 

You have an extension number and an Avaya Communication Manager security 
code (password) for each IP telephone.

 

11. 

A Category 5e LAN jack is available at each phone site.

 

12. 

Electrical power is provided to each telephone by a Telephone Power Module (DC 
power jack) (must be ordered separately). If the LAN will supply IEEE-standard 
power to the 4601/4602/4602SW/4606/4610SW/4612/4620/4620SW/4621SW/
4622SW/4624/4625SW/4630SW, no power module is required.

13. 

1 Category 5e modular line cord is available for the connection between the IP 
telephone and the PC.

14. 

Verify that the 4600 Series IP Telephone package includes the following 
components:

●

1 telephone set

●

1 telephone handset, except the 4622SW and 4690 IP Conference 
Telephones

●

1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, 
plugged into the telephone and the handset, except the 4690 IP Conference 
Telephone

●

1 Category 5 modular line cord for the connection from the IP telephone to 
the Ethernet wall jack

●

4600 Series IP Telephone Safety Instructions (555-233-779) 

●

Power Brick for 4630 IP Telephones only

●

Stylus for 4630/4630SW IP Telephones only 

●

Power Interface Module for the 4690 IP Conference Telephone only

15. 

If applicable to your current installation, verify that the following equipment/
information is present:

●

30A Switched Hub (applicable to the 4612/4624/4630 only)

●

Stand Instructions, packaged with certain IP Telephones