AT&T 1070 Manual Do Utilizador
31
One touch
Continued from previous page
•
Store a signal for switching to temporary
tone dialing. If you have dial pulse (rotary)
service, this signal is required for some
special services. Press
tone dialing. If you have dial pulse (rotary)
service, this signal is required for some
special services. Press
[ ] or [ ] until you see
TONE, then press [ENTER]. A T appears on
the screen. All numbers you enter after this
will send touch-tone signals during dialing.
the screen. All numbers you enter after this
will send touch-tone signals during dialing.
•
You can store the flash signal required by
some special services as part of a dialing
sequence. Press
some special services as part of a dialing
sequence. Press
[ ] or [ ] until you see
FLASH, then press [ENTER]. An F appears on
the screen. Continue storing the number as
usual.
the screen. Continue storing the number as
usual.
•
To erase the last digit, scroll to DELETE
CHAR and then press [ENTER].
CHAR and then press [ENTER].
-OR-
Press
[REMOVE].
•
To copy the most recently dialed number
from redial, press
from redial, press
[(AUTO) REDIAL]. You can
copy only the last number dialed from this
extension to a one-touch location. You cannot
copy the other numbers in the redial stack.
extension to a one-touch location. You cannot
copy the other numbers in the redial stack.
•
To cancel programming, scroll to CANCEL
and then press
and then press
[ENTER].
5. Press the desired one-touch key to store the
telephone number in a location.
-OR-
Press
Press
[LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
location.
6. To move to the next feature, press
[ ].
-OR-
To exit, press and hold
To exit, press and hold
[ENTER].
PROGRAM
5550100
5550100
PAUSE
PROGRAM
5550100
5550100
TONE
PROGRAM
5550100
5550100
FLASH
PROGRAM
5550100
5550100
DELETE CHAR
PROGRAM
5550100
5550100
CANCEL