Avaya 2060 Manual Do Utilizador

Page 24 - Diverting Calls 

Setting the Divert Types and Personal Numbers 

It is strongly recommended that you set up Divert All with frequently used personal 

number destinations. Once set these numbers will be displayed (after pressing the 

DIVERT key) as  MOBILE,  HOME, DELEGATE  or  OTHER. 
You can also set your phone to divert when Busy or on No Answer (see below). 
To set frequently used Divert All numbers: 
1. Press 

PROGRAM and then DIVERT. 

2.  Enter your passcode (see page 40) and press SCROLL. 
3. Press NUMBER. The divert destination options  MOBILE,  HOME or 

are displayed. 

4.  Select the first divert all destination. Press  DELETE to remove any previous 

entry and then enter the required number. 

Note: For MOBILE, and  HOME numbers only, you do not have to add 

the line access prefix. If you are setting  OTHER with an off switch number, 

you must add a line access number. Press DONE

to enter the number. 

5.  Either select the next divert destination and repeat step 4 or press DONE  and 

SCROLL again to set the timeout (if required). Otherwise jump to step 7. 

6. Press 

TIMEOUT  and select the divert all destination from the options 

displayed. Press  CANCEL to remove any previous entry and then enter the 

time in seconds (sets the length of time that the call will ring at the active 

destination number before reverting to your voice mailbox). Press DONE  and 

either select another divert all destination and enter a timeout or jump to step 7. 

7.  If a system speed dial number is required press  ALL followed SPEED DIAL. 

Select the required system speed dial store number. Alternatively, you can 

press  ALL and enter another alternative divert all number. These will be 

displayed as OTHER when the DIVERT key is pressed to activate divert all. 

8. Press 

PROGRAM to finish. 

9.  To activate divert all, see page 25. 

 

To set infrequently used Divert All numbers: 
1. Press 

PROGRAM and then DIVERT. 

1.  Enter your passcode (see page 40) and press  ALL. 
2.  If a system speed dial number is required press SPEED DIAL. Select the 

required system speed dial store number. Alternatively, you can enter another 

divert all number. When frequently used divert all destinations have been set 

(see above) this infrequently used number will be displayed as OTHER when 

the DIVERT key is pressed. Alternatively, if no frequently used divert all number 

have been set the only   will appear above DIVERT when divert all is switched 

on. 

4. To 

activate 

Divert All, see page 25. 

 

To set Divert on Busy or No Answer: 
1. Press 

PROGRAM, DIVERT and enter your passcode (see page 40). 

2. Select 

either ON BUSY or NO ANS.

followed by  DELETE. 

3.  Enter the required divert destination number and press DONE . 
4. Press 

PROGRAM to finish. 

 

These diverts, once set up, are always active. The No Answer divert is normally set 

to your voice mailbox. You can alter the time that a calls rings you before being 

diverted (see page 36). 

Page 24 - Diverting Calls 

INDeX 10.0 2030/50/60 User's Guide 

Setting the Divert Types and Personal Numbers 

38DHB0002UKFN Issue 2 (07/2002)