Toshiba 50HM67 Manual Do Utilizador
19
HM67 (E/F) Web 213:276
Chapter 2: Connecting your TV
Connecting an HDMI
™
or DVI device
to the HDMI input
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source device, or
uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form
from EIA/CEA-861-861B–compliant
uncompressed digital video from an HDMI source device, or
uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form
from EIA/CEA-861-861B–compliant
[1]
consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
The HDMI input will accept and display 480i, 480p, 720p,
1080i, and 1080p signals.
DVI output).
The HDMI input will accept and display 480i, 480p, 720p,
1080i, and 1080p signals.
Note: To connect a PC to the HDMI input, see page 21.
To connect an HDMI device, you will need:
•
one HDMI cable (type A connector) per HDMI device
– For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (HDMI
™
). You should use
an HDMI cable shorter than 16.4 ft (5m) for 1080p input
signals.
signals.
– HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration).
– See “Setting the HDMI
™
audio mode” (
- page 34).
To view the HDMI device video:
Select the HDMI 1, HDMI 2, or HDMI 3 video input source on
the TV.*
the TV.*
Note: If the audio output mode of the HDMI device is other
than the L-PCM mode, the TV speakers will not output sound.
than the L-PCM mode, the TV speakers will not output sound.
* To select the video input source, press INPUT on the remote control
(
- page 23). To program the TV remote control to operate other
devices, see Chapter 3.
To connect a DVI device, you will need:
•
one HDMI-to-DVI adapter cable (HDMI type A connector)
per DVI device
per DVI device
– For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
recommended length is 6.6 ft (2m).
•
one pair of standard analog audio cables per DVI device
– An HDMI-to-DVI adapter cable transfers video only.
Separate analog audio cables are required (see
illustration).
illustration).
– See “Setting the HDMI
™
audio mode” (
- page 34).
Note: To ensure that the HDMI or DVI device is reset properly,
it is recommended that you follow these procedures:
it is recommended that you follow these procedures:
• When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
[1] EIA/CEA-861-861B compliance covers the transmission of
uncompressed digital video with high-bandwidth digital content
protection, which is being standardized for reception of high-
definition video signals. Because this is an evolving technology, it
is possible that some devices may not operate properly with the TV.
protection, which is being standardized for reception of high-
definition video signals. Because this is an evolving technology, it
is possible that some devices may not operate properly with the TV.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
trademarks or registered trademarks of HDMI Licensing LLC.
VIDEO AUDIO
L
R
R
L
IN
OUT
IN
HDMI
OUT
HDMI device
TV back panel
VIDEO AUDIO
L
R
R
L
OUT
IN
DVI / HDCP
OUT
IN
DVI device
TV back panel
50HM67_EN.book Page 19 Thursday, March 29, 2007 11:28 AM