Sony KP-FX43 Manual Do Utilizador

50

Additional Information

• Check the power cord, antenna and

the VCR connections.

• Press 

I

/1 on the remote.

• Press ! on the projection TV to turn

off the projection TV for about five
seconds, then turn it on again.

• Press 2 + to increase the volume

level.

• Press % to cancel the muting.

• Press A/B until a better sound is

heard.

• Press 

 or 

 .

• Do not use a hair dryer or other

equipment near the projection TV.

• Adjust the antenna direction for

minimum interference. Contact a
Sony dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“FINE”) function.

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Turn off or disconnect the booster if it

is in use.

• Display the “PICTURE” menu and select

“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.

• Display the “SETUP” menu and

check the color system (“COL SYS”)
setting (usually set this to “AUTO”).

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• The power cord, antenna

or VCR is not connected.

• The projection TV is not

turned on.

• The volume level is too

low.

• The sound is muted.

• The broadcast signal

has a transmission
problem.

• The sound of the right

picture is selected
when TWIN pictures
are displayed.

• There is local

interference from cars,
neon signs, hair dryers,
power generators, etc.

• Broadcast signals are

reflected by nearby
mountains or buildings.

• The antenna direction

needs adjustment.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna direction

needs adjustment.

6

15
16

16

16

26

21

–

–

–

46

–

–

38

43

–