Panasonic PT 47XD64 Manual Do Utilizador

16 z

The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, DBS, RCVR or
AUX. Follow the procedures for programming your Remote
Control with or without a code for the component.

1. Confirm that the external component is plugged and

operating.

2. Turn the component off.

3. Press 

  and  

together, 

for  at least 5

seconds. After 5 seconds, the illuminated mode
(component) buttons will begin to flash. Release the OK
and POWER buttons.

4. Press appropriate component button on the Remote

Control VCR, DVD (CD), DBS, RCVR, CBL or AUX
(PVR or VCR2). The component button will illuminate
steadily and all others will go out.

5. Enter the 3-digit component code using the Remote

Control numeric keypad (0 ~ 9 buttons). The component
button will blink twice.

6. Press the Remote Control 

 to test the component.

If the procedure was successful, the component will
turn on and the component key will blink twice and then
go out.

This procedure searches all codes and is called the
“sequence method.”

1. Confirm that the external component is plugged in and

on.

2. Turn the component off.

3. Press  

and 

together,  for  at least 5

seconds. After 5 seconds, the illuminated mode
(component) buttons will begin to flash. Release the OK
and POWER buttons.

4. Press appropriate component button on the Remote

Control.

5. Press the 

 button to set the remote control into the

step and set mode.

6. Point the remote control towards the component.
7. Press VOL 

(the mode key will blink three times), then

press the Remote Control 

 to test the component.

Continue this process until the proper code is found. If
the procedure was successful, the component will turn
on.

Each time you press the VOL  button, make sure that
the component key blinks twice before pressing the
POWER button. 

8. Once the device responds, press 

 to store the

code. The mode (component) button will blink twice.

It may take many attempts before the correct code
is found. If you miss a code, press  VOL, then press the

The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.

TV (Panasonic Only)

Panasonic Code

VCR (Preset)

Panasonic Code 

DVD and CD (Preset) 

Panasonic Code

DBS STB & CBL STB (Preset)

Panasonic DBS Code

Audio Receiver (Preset)

Panasonic RCVR Code

Cable (Preset)

Panasonic CABLE 

Code

Personal Video Recorders, 

Ca9 rgenVC2

PanasonicPver

Pdeo eer VCode