Samsung HL-P4674W Manual Do Utilizador
• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.
1
Unplug TV, then use a screwdriver
to remove the screw as shown in
the picture.
(Remove the rubber cap and
unscrew the screw. )
to remove the screw as shown in
the picture.
(Remove the rubber cap and
unscrew the screw. )
2
Remove the Lamp cover.
(Exert a bit of force to the right
and pull for easy opening.)
(Exert a bit of force to the right
and pull for easy opening.)
3
Use a screwdriver to remove the
screws securing the Lamp.
There are 2 screws: one on the
left and one on the right. When
the screws have been completely
unfastened, they will still be
connected to the body of the
Lamp.
screws securing the Lamp.
There are 2 screws: one on the
left and one on the right. When
the screws have been completely
unfastened, they will still be
connected to the body of the
Lamp.
4
Separate the Lamp from the
engine by holding the handle and
pulling it out.
engine by holding the handle and
pulling it out.
5
To reinstall the Lamp, follow these
steps in reverse order.
steps in reverse order.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
English - 7
BP68-00423A-00(02~13) 9/2/04 4:08 PM Page 7