Yamaha CVP-409 Manual Do Utilizador
Using Headphones
CVP-409/407 Owner’s Manual
17
Introduction
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks located on the bottom
left of the instrument.
Two sets of standard stereo headphones can be connected. (If you are using only
one pair of headphones, you can plug them into either of these jacks.)
left of the instrument.
Two sets of standard stereo headphones can be connected. (If you are using only
one pair of headphones, you can plug them into either of these jacks.)
Using the Headphone Hanger
A headphone hanger is included in the instrument package so that you can hang the
headphones on the instrument. Install the headphone hanger using included two screws
(4 x 10mm) as shown in the figure.
headphones on the instrument. Install the headphone hanger using included two screws
(4 x 10mm) as shown in the figure.
MIN
MAX
INPUT
MIC.
MIC. LINE
PHONES
VOLUME
LINE IN
CAUTION
Do not listen with the head-
phones at high volume for
long periods of time. Doing
so may cause hearing loss.
phones at high volume for
long periods of time. Doing
so may cause hearing loss.
CAUTION
Do not hang anything other
than the headphones on the
hanger. Otherwise, the instru-
ment or the hanger may be
damaged.
than the headphones on the
hanger. Otherwise, the instru-
ment or the hanger may be
damaged.
Outputting sound from the speaker while headphones are con-
nected
nected
1 Call up the operation display.
[FUNCTION]
→ [J] UTILITY → TAB[√][®] CONFIG 2
2 Press the [3π
π
π
π†
†
†
†
]/[4π
π
π
π†
†
†
†
] (SPEAKER) button to select “ON.”
Outputting sound only from the headphones
From the display called up in step 1 above, press the [3π
π
π
π†
†
†
†
]/[4π
π
π
π†
†
†
†
]
(SPEAKER) button to select “OFF.”
When “OFF” is selected, the speakers will not sound and you can only hear
the instrument sound via the headphones.
When “OFF” is selected, the speakers will not sound and you can only hear
the instrument sound via the headphones.