Sanyo PDG-DXT10KL Manual Do Utilizador

6. Maintenance

97

x

e.

x

A minimum space is required for replacement. See page 

24

 and

 98 

for more details.

o Replacing Consumable Parts 

During the course of normal usage, consumable parts become worn out resulting in reduced performance. The following 
guides detail how to replace the various consumable parts within the projector quickly and safely. 

x

Before replacing any of the parts, please take note of the following: 

x

Ensure that the projector is turned off and disconnected from the power supply. 

x

Ensure that the projector is in a clean, stable position before replacing parts. 

x

Allow at least one hour after shutdown for the projector to cool before attempting replacing any consumable parts. 

Do not interchange Lamp 1 and Lamp 2 after the projector has been used onc
Doing so will not allow the projector to display the correct lamp usage hours. 

When the lamps are replaced, the filters should also be replaced, not cleaned.

Refer to the following guide to replace the filters. 

and or fingers while lifting the projector to replace the filters. Doing so 

could injure your hand or fingers. 

Do not drop the projector on your h

Gently slide the filter covers in the di-
rection shown. 

Lift the foam from all three filters in
the direction shown. Remove com
pletely fr

-

om the filter cover and 

discard.