Psion Teklogix 7525 Manual Do Utilizador

9.3.1  Installation–Chargers And Docking Stations

When installing a charger or docking station at your site, consider the following 
guidelines. 

•

Keep chargers and docking stations away from excessive dirt, dust and 
contaminants. 

•

Chargers will not charge batteries outside an ambient temperature range 
of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or 
docking station be operated at room temperature

–

between 18° C and 25° C 

(64° F to 77° F) for maximum performance.

After unpacking your unit:

•

Visually inspect the charger for possible damage. 

•

Install the IEC power cord and apply power. 

9.3.2  Power Consumption Considerations

Check to ensure the mains circuit supplying chargers and/or docking stations is 
adequate for the load, especially if several chargers and docking stations are being 
powered from the same circuit. 

•

Quad charger

–

can consume up to 2A @ 120VAC or 1A @ 240VAC.

•

Quad docking station

–

can consume up to 3A @ 120VAC or 1.5A @ 

240VAC.

9.3.3  Operator Controls

WORKABOUT PRO docking stations and chargers have no operator controls or 
power switches.

9.3.4  Important Charger Safety Instructions

•

–

This manual contains important safety and 

operating instructions for battery charger s.

•

Before using the battery charger, read all instructions and cautionary 
markings on (1) battery charger, (2) battery, and (3) product using battery.

•

The mains power cord shall comply with national safety regulations of the country 
where the equipment is to be sold.

•

Use of an attachment not recommended or sold by the battery charger 
manufacturer may result in fire, electric shock, or personal injury.