Raritan Computer KX2101-v2.20-0B-E Manual Do Utilizador
Chapter 6: Device Management
144
USB - Forces the KX II-101 to use the USB connection to send
Keyboard and Mouse data to the host device.
PS/2 - Forces the KX II-101 to use the PS/2 connection to send
Keyboard and Mouse data to the host device.
Note: If you are using a Raritan switch on the front-end with a KX II-
101, you must set the Host Interface to PS/2 in order for the
configuration to work properly. See
101, you must set the Host Interface to PS/2 in order for the
configuration to work properly. See
Analog KVM Switch
(on page
162).
3. Click
OK.
To reset to factory defaults:
•
Click Reset To Defaults.
Serial Port Settings
Use the Serial Port Settings page to configure how the KX II-101
employs its integrated serial port.
employs its integrated serial port.
Admin Port
To configure the admin serial port:
1. Choose Device Settings > Serial Port. The Serial Port Settings page
appears.
2. Select the Admin Port radio button, if it is not already selected (this is
the default factory setting).
Choose this option to connect to the KX II-101 directly from a client
PC and access the Command Line Interface through a program such
as Hyperterminal. See
PC and access the Command Line Interface through a program such
as Hyperterminal. See
Command Line Interface (CLI)
(on page
3. In the Serial Settings section, configure the following fields:
Speed
Stop
Bits
Data
Bits
Handshake
Parity