Raritan Computer 255-30-6000-00 Manual Do Utilizador
Renaming a BladeCenter Chassis
132
9. Press F2 to go to the Selection Menu and verify that blade server
status has been updated. Green channels indicate that there is a blade
server installed and it is powered on; black channels indicate that
either there is no blade server installed or the installed blade server is
powered off.
server installed and it is powered on; black channels indicate that
either there is no blade server installed or the installed blade server is
powered off.
If any user is accessing a blade server while the refresh command is
issued by the administrator, two results are possible:
issued by the administrator, two results are possible:
• If the keyboard/mouse activity has been idle for more than 200ms, the
user(s) will be disconnected and the refresh command is executed.
• Otherwise, the refresh command is NOT executed and the message
“BladeServer is occupied” will be displayed in the message bar.
Renaming a BladeCenter Chassis
By default, IBM BladeCenter is named “IBM‐Blade” in the Selection
Menu of Paragon system.
Menu of Paragon system.
1. When the OSUI is onscreen, press F5 to go to the Administration
Menu.
2. Select the Channel Configuration submenu, and press Enter.