Sony HES-V1000 Manual Do Utilizador

A message appears notifying that [Standby Mode] in 
[System Settings] was set to [Standard].
The default setting is [Eco].

• The [Standard] setting consumes more power than the 

[Eco] setting.

• Setting [Music Server Settings] to [On] will 

automatically set [Standby Mode] to [Standard]. See 
page 122 for details about [Music Server Settings].

i

j

Select if you want to change the method for 
client device registration and press ENTER.
Client registration is required to allow DLNA 
compatible network audio devices and “Music 
Transfer” to access the server's music content from 
other rooms.
In this manual, “client device” refers  to devices that 
receive and play music content on the home network. 
Home Entertainment Server, that shares music in 
response to the client’s request is called “server.”

k

• To use the AMG database or the music server function, 

press HOME, select [Settings] – [Network Settings] – 
[Music Server Settings] and make necessary changes 
(page 121).

z

• If you want to reset these settings to their factory defaults, select 

[Settings] – [Resetting] – [Reset to Factory Default] (page 124).

• You can re-run Easy Setup by selecting [Settings] – [Easy Setup] 

• To keep the power consumption to the minimum when the server is 

turned off, set [Standby Mode] to [Eco] (see below).

a Press HOME to turn on the Home Menu.

b Select [Settings] to display the icons.

c Select [System Settings] and press ENTER.

d Select [Standby Mode] and press ENTER.

e Select [Eco] and press ENTER.

Standby Mode Switching

To activate the Music server function even when 
the power is off, [Standby Mode] under [System
Settings] was changed to [Standard].

Close

Select the client registration method.
If you are making this setting letter, select [Manual].

Manual

Auto

Easy Setup - Client Registration

RETURN

Return

4/4