Mitsubishi Electronics AJ65bt-r2 Manual Do Utilizador
9 - 11
MELSEC-A
9 PROGRAM EXAMPLES
9.2.3 When using dedicated commands with QCPU (Q mode) / QnACPU
An example of the program for using the dedicated commands with the QCPU (Q
mode) / QnACPU when using the buffer memory automatic update function is shown
below.
With this program, it is assumed that the CC-Link parameters are set as follows.
mode) / QnACPU when using the buffer memory automatic update function is shown
below.
With this program, it is assumed that the CC-Link parameters are set as follows.
Parameter setting item
Setting value
No. of modules
1 module
Module head input/output No.
0
Module type
Master station
Total No. of connected modules
1
Remote input (RX)
X100
Batch refresh device
Remote output (RY)
Y100
Station type
Intelligent device station
No. of occupied stations
One station occupied
Transmission buffer size
0
Reception buffer size
0
Station information
Automatic update buffer size
1536
<GPPW parameter setting screen>
When the programmable controller series is
QCPU (Q mode)
When the programmable controller series is
QnACPU
<GPPW station information setting screen>