Axis Communications 243Q Blade Manual Do Utilizador

Link-Local IPv4 address
Link-Local Address is enabled by default and assigns the network camera with an 

additional IP address for the UPnP protocol. The network camera can have both a 

Link-Local IP and a static/DHCP IP address at the same time - these will not affect each 

other. See  UPnP™, on page 46. 

HTTP 
The default HTTP port number (80) can be changed to any port within the range 

1024-65535. This is useful for simple port mapping.

HTTPS 
The default HTTPS port number (443) can be changed to any port within the range 

1024-65535. This is useful for simple port mapping.

NAT traversal (port mapping) for IPv4
Use NAT traversal when the AXIS 243Q Blade is located on an intranet (LAN) and you wish 

to make it available from the other (WAN) side of a NAT router. With NAT traversal 

properly configured, all HTTP traffic to an external HTTP port in the NAT router will be 

forwarded to the network camera.

The FTP server running in the AXIS 243Q Blade enables the upload of new firmware, user 

applications, and so on. Check this box option to enable the service. 

RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Check the box to 

enable the RTSP server and enter the RTSP port number to use. The default setting is 554, 

and the allowed port range is 1024-65535. Note that MPEG-4 streams will not be available 

if this is not enabled.

Network traffic 
Connection type - The default setting is Auto-negotiate, that is, the correct speed is 

automatically selected. If necessary, the connection speed can be set by selecting it from 

the drop-down list. 

Maximum bandwidth - Specify, in Mbit/s or kbit/s, the maximum bandwidth that the 

camera is allowed to use on the network. This is a useful function when connecting the 

camera to busy or heavily loaded networks. The default setting is Unlimited. 

When using MPEG-4 as the video format, remember that setting a maximum bandwidth value here may 
create problems for individual video streams if the maximum value is less than the sum of the bit rates set 
for the video streams.

For more information, please see the online help

.