Avaya S8100 Manual Do Utilizador
5 Upgrade and repair procedures
Replace the TN2314 Processor circuit pack
226
S8100 Installation and Upgrades
November 2003
Replacing a TN795 with a TN2314
NOTE:
If you have any additional login accounts and passwords or software that is not
Communication Manager loaded on the system, you will have to reconstruct or reload this
information on the new TN2314 or it will be lost. Write down any information you need
from the old system that will enable you to add it to the new system.
Communication Manager loaded on the system, you will have to reconstruct or reload this
information on the new TN2314 or it will be lost. Write down any information you need
from the old system that will enable you to add it to the new system.
replace the TN795 with the TN2314 Processor circuit pack.
Replace the TN2314 Processor circuit pack
This section outlines the procedures to replace an existing TN2314 Processor circuit pack.
NOTE:
If the TN2314 circuit pack is replaced for repair, a new license file must be obtained and
installed. Communication Manager, INTUITY AUDIX, and SNMP will not start if the
license file does not match the new TN2314’s serial number. Ensure that the new circuit
pack has solved the problem before you access RFA to update the license file.
installed. Communication Manager, INTUITY AUDIX, and SNMP will not start if the
license file does not match the new TN2314’s serial number. Ensure that the new circuit
pack has solved the problem before you access RFA to update the license file.
and subsequent sections, for
information about obtaining and installing license, password (authentication), and installation-script files.
NOTE:
When you swap out a processor that has an RFA-generated license file, the faulty
processor must be returned to repair. It is not re-usable because the serial number of the
swapped out processor has been captured within an SAP database and is marked as
unusable. If you try to generate a license against it, you will be denied.
processor must be returned to repair. It is not re-usable because the serial number of the
swapped out processor has been captured within an SAP database and is marked as
unusable. If you try to generate a license against it, you will be denied.
To replace a TN2314 circuit pack, follow the steps in the Job Aid,
on page 26, and substitute “new TN2314” for “TN795.”
Replace the hard disk