Avaya S8100 Manual Do Utilizador
J
Install and cable a CMC1 cabinet
Install equipment-room hardware for CMC1
S8100 Installation and Upgrades
377
November 2003
Circuit pack installation
!
WARNING:
When handling circuit packs or any components of a CMC1, always wear an authorized wrist
ground strap. Connect the strap to the ground connector provided on the system’s cabinet.
ground strap. Connect the strap to the ground connector provided on the system’s cabinet.
Circuit-pack slot loading
Every circuit-pack slot in the CMC1 is a “universal slot.” Any slot can contain any type of port circuit
pack, with the following exceptions for Cabinet A.
pack, with the following exceptions for Cabinet A.
1
Install the TN2314 Processor circuit pack in slot 2. See
2
Install the required TN744E Call Classifier/Tone Detector circuit pack in slot 3.
3
Load a port circuit pack in every other slot. See
on page 378 for the recommended circuit-pack layout.