Runco CX-46HD Manual Do Utilizador
Runco CX-40HD/CX-46HD Owner’s Operating Manual
9
PRE
L
IMINAR
Y
1.
OFF / ON
Use these buttons to turn the Crystal Series LCD Display on or off.
2.
Numeric Buttons
Use these buttons to enter TV channel numbers or menu pass codes. Use the TV
button to switch to the Antenna/DTV/CATV input. Use the
button to switch to the Antenna/DTV/CATV input. Use the
-
button to enter DTV
sub-channel numbers.
3.
Source Selection Buttons
INPUT 1
Press this button to switch to Input 1.
INPUT 2
Press this button to switch to Input 2.
INPUT 3
Press this button to switch to Input 3.
INPUT 4
Press this button to switch to Input 4.
HDMI 1 / HDMI 2
Use these buttons to select a Digital Video input (HDMI 1 or HDMI 2).
RGB HD
Press this button to switch to the RGB HD input.
4.
Memory Preset Buttons
CUST
Press to recall settings for the current input from the “Custom” memory preset.
ISF NT (Night)
Press to recall settings for the current input from the “ISF Night” memory preset.
ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
Input 1 and Input 2 have both S-Video and composite video
connectors. Input 3 and Input 4 have both component and
composite video connectors.
connectors. Input 3 and Input 4 have both component and
composite video connectors.
To specify which connection type you are using – or to switch from
one to the other if equipment is connected to both – use the Input
Selection menu under Setup (refer to Input Selection on page 40).
one to the other if equipment is connected to both – use the Input
Selection menu under Setup (refer to Input Selection on page 40).
Note