321 Studios 9356130 Manual Do Utilizador

Copyright

©2003 Nokia. All rights reserved.

Camera position: If the camera is placed in an upright position, select Normal. If the camera is 
mounted upside down, for example on a ceiling, select Upside down. With this setting you can ensure 
that the images captured by the camera are not sent upside down.

When you have made the necessary changes, click Apply to use the new settings. 

To use the pre-configured factory values for all the camera settings, click the Restore button.

Motion detection: check this box if you want the camera to send you images when it detects motion 
in its coverage area. For more information, see Using motion detection on page 30.

Send SMS when motion detected: check this box if you want the camera to send you a notification 
immediately when it has detected motion.

Send SMS after last detection: check this box if you want the camera to send you an SMS message 
after it has sent you all the defined motion detection images (see below) and has stopped detecting 
motion.

Image sending delay after detection: set the period after which the camera sends you an image 
message when it has captured a motion detection image.

Number of detections: set how many motion detection image messages (0-10) you want the camera 
to send you before turning off the motion detection function. If you set 0 as the number of image 
messages, motion detection remains on until you turn it off.

Note: A motion detection image message can contain several images captured at 0.5 second 
intervals. See below.

Number of images per detected motion: set how many images (1-3) you want the camera to send in 
each motion detection image message.