321 Studios 9356130 Manual Do Utilizador

Copyright

©2003 Nokia. All rights reserved.

To start motion detection, press the motion detection button on the camera (see  Figure 1 on page 4).

Note: You have 60 seconds to leave the premises before motion detection starts.

You can also start motion detection by sending the SMS command 2 on [number of image messages 
(0-10)] to the Nokia Observation Camera (replace [number of image messages (0-10)] with the number 
of motion detection image messages you want the camera to send you), or you can configure the 
camera with PC Suite. 

Note: If you set 0 as the number of image messages, motion detection remains on until you turn 
it off.

When motion detection is on, LED 1 of the camera is red. See Light indicators on page 26. When the 
camera detects motion in the coverage area, it captures images and sends the number of image 
messages specified in the settings to your mobile phone or e-mail address. Motion detection is then 
turned off. If you want to use motion detection again, send the SMS message 2 on [number of image 
messages (0-10)] to the Nokia Observation Camera. 

Note: Motion detection does not work if there are obstacles, such as windows or walls between 
the camera and the target.

Note: The size of the image messages and possible network-related issues may affect the time 
in which the image messages are received.

If the camera has detected motion, and you do not want it to send motion detection messages to 
anyone, you have 15 seconds to turn off motion detection by pressing the motion detection button on