JVC AV 56P777 Manual Do Utilizador

This TV has three color projection tubes: one for red, green, and blue. When mixed together 
in the proper portions, the output of these three color tubes can produce any color. To produce 
these colors, however, the beams must be precisely aligned over each other so that the colors 
can be mixed. The produce of aligning these picture beams is called “convergence”.

•   Please have your TV on for at least 20 minutes before using this feature.
•   This adjustment will be needed only when the colors of the characters/lines are separated 

and lack in distinction. If not, please don’t perform the adjustment.

Colors may become separated after the TV has been moved, or over a long period of time if 
regularly subjected to low levels of vibrations. If the colors become separated, please perform 
the adjustments below again. 

     Press the M

ENU

 button

π†

      To "Picture Adjust"

è

     To Enter

π†

      To CONVERGENCE

è

     To Enter

π†

      To choose MANUAL

è

     To Enter

If all the lines are white, no convergence adjustment is 
necessary.  If not, you need to perform the manual color 
convergence below.

           Select the location you want to adjust by using the  

number buttons on the remote control.

           Press the S

LEEP

 button to change the color of the box       to the color of the cross 

you wish to adjust (red or blue).

π

†

  

è

 

Adjust the position of the cross.

     Press the O

•   When you adjust the convergence, make sure you start with the center position (position 5), 

and work your way around radially for best results.

•   When you make the adjustment in the center (position 5), you are making the adjustment for 

the whole screen. In other positions, you are making the adjustment only in that area.

•   You can reset the adjustment if you do not like the results. 

2

8

4

5

6

LCT2121-001A-A English.indd   50

LCT2121-001A-A English.indd   50

6/21/06   9:30:40 AM

6/21/06   9:30:40 AM