ICOM IC-208H Manual De Instruções
VII
QUICK REFERENCE GUIDE
■ Your first contact
Now that you have your IC-208H installed in your car or
shack, you are probably excited to get on the air. We would
like to take you through a few basic operation steps to make
your first “On The Air” an enjoyable experience.
shack, you are probably excited to get on the air. We would
like to take you through a few basic operation steps to make
your first “On The Air” an enjoyable experience.
1. Turning ON the transceiver
Before powering up your IC-208H, you may want to make
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
➥ While pushing both [SET•LOCK] and [S.MW•MW], push
[PWR] for 1 sec. to reset the CPU.
2. Selecting the operating frequency band
The IC-208H has 2 m and 70 cm transmittable bands.
➥ Push [BAND] to select the desired frequency band.
Using the HM-133
You can select the desired frequency band from the HM-133.
Push
Push
Push [BAND] to select the desired frequency band.
[BAND]
[PWR]
While pushing [SET•LOCK] and [S.MW•MW], turn power ON.
[SET•LOCK]
[S.MW•MW]
[VOL]
Set [VOL] and [SQL] controls to 9–10 o’clock positions.
[SQL]