KVH Industries FB500 Manual Do Utilizador
Chapter 2: Getting started
24
Connecting the IP handset
Connecting the IP handset
Power supply
The IP handset is powered from the LAN interface, using Power over Ethernet.
Starting up the IP handset
The following procedure is for the TracPhone FleetBroadband IP handset. The
procedure may be different for another type of IP handset.
procedure may be different for another type of IP handset.
Do as follows:
1. Connect the IP handset to one of the LAN (PoE) connectors on the terminal
as described in the user manual for the handset.
The handset starts up automatically.
2. If your SIM card requires a PIN and the PIN has not yet been entered in
the terminal, you can enter the PIN from the BGAN menu of the IP
handset.
handset.
To enter the PIN, select BGAN > Enter PIN from the handset menu system.
Note that this menu item is only available if the terminal is waiting for a
PIN. Then type in the Administrator user name and password followed by
the PIN for the terminal.
Note that this menu item is only available if the terminal is waiting for a
PIN. Then type in the Administrator user name and password followed by
the PIN for the terminal.
For further information on the IP handset, refer to the user manual for the
handset.
handset.
Note
The first handset that is connected to the LAN interface on the
terminal is automatically registered in the terminal and assigned the
local number 0501 and password 0501. For information on how to
connect additional handsets, see Connecting a new IP handset on
page 105.
terminal is automatically registered in the terminal and assigned the
local number 0501 and password 0501. For information on how to
connect additional handsets, see Connecting a new IP handset on
page 105.
BGAN-X_UM.book Page 24 Wednesday, April 30, 2008 12:48 PM