Audio-Technica ATW-R1810 Folheto

1800 series wireless systems (single-channel)

Single-channel Frequency-agile UHF Camera-mount Receiver

The 1800 Series single-channel, frequency-agile true diversity UHF 

wireless receiver provides a new standard for audio and RF performance 

with user-friendly features and flawless operation for camera-mount and 

special remote applications. The receiver provides the audio quality, range 

and reliability necessary for the most demanding requirements of today’s 

video and audio systems with two independent receivers in one small 

housing.

The compact ATW-R1810 receiver incorporates automatic frequency 

scanning which eliminates the need for searching for clear channels and 

automatically selects the most appropriate frequency for operation. 

The flexibility in programming both receivers and transmitters allows the  

user to customize this wireless system to the needs of virtually every 

application. True Diversity reception with automatic logic circuitry within 

each receiver selects the strongest RF signal. The top-mount antennas 

are removable allowing for different types of antennas and antenna 

accessories to be used. The receiver incorporates an easy to read LCD 

display with back lighting for easy function monitoring. An advanced 

digital Tone Lock

™

 squelch system provides enhanced rejection 

of interference on the receiver. Multi-function LED indicators are provided 

for diversity, power and peak signal indication. The receiver’s compact 

design and included pouch with stainless steel clip allow for easy 

attachment to cameras, sound mixer bags or the user’s belt. The 

receiver is designed to operate on four standard AA alkaline batteries 

(providing over 10 hours of continuous battery operation) or on external 

12V DC. Balanced output allows receiver output to match cameras and 

field sound mixers. Full headphone confidence monitoring with level 

control enables the operator to monitor the receiver’s audio. All audio 

output connections are standard mini-XLRM type connections with TA3F 

to XLRM-type adapter cables included with the system.

Additionally, the frequency configuration used in 1800 Series components 

allows them to be interchangeable with the Audio-Technica 3000 Series 

components.

The frequency-agile FM channel wireless receiver shall be part of a wireless 

microphone system consisting of a receiver and the appropriate transmitter. 

Operating in the UHF bands of either 541.500–566.375 MHz or 655.500–

680.375 MHz the system shall be capable of operating on any of 996 PLL-

synthesized frequencies per band (adjustable in 25 kHz steps).

The all-metal receiver shall be designed for camera-mount or portable opera-

tion. The receiver shall utilize True Diversity reception with automatic logic 

circuitry to choose the strongest RF signal appearing at either antenna and 

shall provide an automatic scanning function to select appropriate local 

usable frequencies for proper wireless system operation. All configuration 

functions of the receiver shall be controlled by soft-touch controls on the 

receiver top. The receiver shall incorporate a soft-touch power switch and 

shall have LED operator indicators on the top panel for diversity operation 

(A-B) and a power/peak indicator. A backlit LCD display shall be provided on 

the receiver for showing receiver battery status and selected frequency. The 

system will be equipped with an advanced Tone Lock

™

 digital identification 

system. The receiver’s design shall provide totally silent audio output mute 

when the wireless transmitter is turned off or signal is lost to ensure that 

only the desired wireless microphone transmitter allows the receiver to be 

un-muted. The receiver shall incorporate a built-in audio monitoring section. 

Separate level controls shall be provided for audio monitoring and main out-

put. A headphone connector shall be provided on the bottom of the receiver.

The receiver shall be able to be powered by 4 alkaline AA batteries or 12 volts 

DC at 500 mA. Antennas shall be located on the top of the receiver and shall 

incorporate standard BNC-type connectors to allow them to be detached 

from the receiver to facilitate the receiver being used with external antennas 

or antenna distribution devices.

The receiver as supplied shall include a soft pouch with stainless steel clip for 

attaching it to a camera, sound mixer bag or the operator’s belt. The receiver 

shall have a metal case with removable battery door and be finished in low-

reflectance black. All controls and indicators shall be clearly labeled as to their 

function and operation.

The wireless receiver shall be an Audio-Technica ATW-R1810 (C/D).