Panasonic TH-P50VT30M TH-P42VT30V Manual Do Utilizador

• Music

• Speech

• User

Selects basic sound mode

• 

The selected mode affects all input signals.

[Music]: Improves sound quality for watching music videos, etc.

[Speech]: Improves sound quality for watching news, drama, etc.

• 

In Music and Speech modes, you can adjust [Bass] and [Treble] 

settings, and those settings will be stored for each mode.

[User]: Adjusts the sounds manually by using the equaliser to suit your 

favourite sound quality.

• 

For the User mode, [Equaliser] will appear on the Sound Menu instead 

of [Bass] and [Treble]. Select the [Equaliser] and adjust the frequency. 

 [Equaliser] (p. 39)

Increases or decreases level to enhance or minimise lower, deeper 

sound output

Increases or decreases level to enhance or minimise sharper, higher 

sound output

• Normal

• Full

Changes the black level in the image for HDMI input mode with DVI input 

signal manually

• 

When the DVI input signal from the external equipment, especially from PC, 

is displayed, the black level may not be suitable. In this case, select [Full].

• 

The black level for HDMI input signal will be adjusted automatically.

• 

For HDMI input mode with DVI input signal only

• Auto

• On

Selects the mode for wobbling of the image to prevent panel 

“image retention”

[Auto]: Automatically works only for the appropriate images and you 

rarely recognise the wobbling.

Scrolls the vertical bar to prevent panel “image retention”

• 

Press the OK button to start scrolling and press any buttons (except 

Standby) to exit this mode.

Locks for each Viewing Mode and input.

Additionally, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], and 

[Reset to Defaults] in the Picture Menu can be locked for [Professional1] 

and [Professional2].

• 

Make a note of the PIN number in case you forget it.

You can copy the selected [Professional1] or [Professional2] settings to 

that of the other input.

The settings of [Contrast], [Brightness], [Colour], [Sharpness], [Tint] and 

[Advanced Settings] will be copied.

• 

You cannot copy to the locked mode.

Press the OK button to reset the present Picture Viewing Mode of the 

selected input to the default settings

∗1 :  Only when [Advance(isfccc)] is [ON] and [Lock Settings] is [Off], except [Viewing Mode] is [THX]

∗2 :  Only when [Viewing Mode] is [Professional1 (isf Day)] or [Professional2 (isf Night)] and 

[Lock Settings] is [Off]

∗3 :  Only when [Viewing Mode] is [Professional1 (isf Day)] or [Professional2 (isf Night)]