Panasonic TH-P42VT30M Manual Do Utilizador

Adjusts the frequency level to suit your favourite sound quality

• 

This function is available when [Mode] is set to [User].

• 

Select the frequency and change the frequency level by using the 

cursor button.

• 

If you want to enhance the bass sound, raise the level of the lower 

frequency. If you want to enhance the treble sound, raise the level of 

the higher frequency.

• 

To reset the levels of each frequency to the default settings, select the 

[Reset to Defaults] by using the cursor button, and then press the OK 

button.

Adjusts the volume level of right and left speakers

Adjusts the volume of the headphones

• Off

• V-Audio

• V-Audio Surround

• V-Audio ProSurround

Surround sound settings 

[V-Audio]: Provides a dynamic enhancer of width to simulate improved 

spatial effects

[V-Audio Surround]: Provides a dynamic enhancer of width and depth 

to simulate improved spatial effects

[V-Audio ProSurround]: Provides a three-dimensional sound space 

with digital reverb effects

• TV

• Audio Out (TV Off)

• TV and Audio Out

Selects to adjust the volume of the audio output

[TV]: Only the volume of TV speakers is adjustable.

[Audio Out (TV Off)]: Only the volume of Audio Out is adjustable and 

mute the TV speaker’s volume.

[TV and Audio out]: the volume of TV speakers and Audio Out is 

adjustable.

• Off

• On

Adjusts the current volume level if it is extremely different from the 

previous viewed channel or input mode

Adjusts the volume of individual channel or input mode

• Over 30cm

• Up to 30cm

Adjusts the low frequency sound

• 

If the back space between the TV and wall is over 30 cm, [Over 30cm] 

is recommended.

• 

If the back space between the TV and wall is within 30 cm, [Up to 30cm] 

is recommended.

• Stereo

• Mono

• M1

• M2

Selects multiplex sound mode (if available) 

[Stereo]: Use this normally 

[Mono]: When stereo signal cannot be received 

[M1] / [M2]: Available while mono signal is transmitted

• 

TV mode only.

• Auto

• PCM

SPDIF: A standard audio transfer file format

Selects the initial setting for digital audio output signal from the DIGITAL 

AUDIO OUT terminal

[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) 

multi-channel are output as Dolby Digital Bitstream.

MPEG is output as PCM.

[PCM]: Digital output signal is fixed to PCM.

• 

For Video mode (p. 54) or Network video contents (p. 67)

• Digital

• Analogue

Selects to fit the input signal (p. 77)

[Digital]: HDMI cable connection

[Analogue]: HDMI-DVI adaptor cable connection

• 

HDMI input mode only

Press the OK button to reset settings of the present [Mode], [Balance], 

[Headphone Volume] and [Surround] in the Sound Menu to the default