LOEWE Connect 37 Full-HD+ 100 Manual Do Utilizador

- 66

Troubleshooting

All menus are displayed in the wrong language. The menu language was set incorrectly.

Press the INFO button in TV mode (Index). 
Mark the first key word and call it with OK. 
Then select the language and confirm it with 
OK.

In the TV menu, Connections cannot be called 
(displayed in grey).

A timer recording is in progress.

Wait until the timer recording ends or delete 
the timer recording (page 55).

The control functions of the Loewe Recorder 
and the Timer are not working or are not 
working properly

a) The Digital Link function is not activated or 

not possible in the recorder.

b) EURO-AV cable is not connected.

c) Recorder is not logged in.

a) Activate Digital Link in the recorder (see 

operating instructions of the recorder).

b) Connect EURO-AV cable (page 47).

c) Register recorder (page 44).

General problems when connecting external 
devices via an AV input.

a)  The device is not logged in to the connection 

wizard or is connected differently than is shown 
in the connection diagram.

b) The AV standard is set incorrectly.

c) The signal type is set incorrectly.

a)  In the connection wizard (TV menu  

Connections  New devices/modifications) 
compare the connection diagram with the 
actual installation and connect as illustrated 
(page 44).

b) Set the correct standard (page 17).

c) Set the correct signal type (page 45).

 If 

AV standard or AV signal is set to "Automatic" 

then this can cause errors to be detected with 
signals that do not comply with standards. 
In this case standard and signal must be set 
according to the information in the operating 
manual of the external device.

The connection of a decoder does not 
function or does not function properly.

a) The signal is not decoded because the correct 

decoder stations have not been selected in the 
connection wizard.

b) In decoder mode the sound is missing because 

the wrong decoder sound has been assigned 
in the connection wizard.

a) Follow the instructions in the connection 

wizard (TV menu  Connections  New 
devices/modifications) and select the 
appropriate decoder transmitter (page 44).

b) Follow the instructions in the connection 

wizard and select the right audio source 
(Decoder, TV oder Autom.) (page 44), see 
also decoder instructions.