Uniden UM-525 Manual Do Utilizador
Using the Radio’s Menus
39
5.
Repeat Step 4 for each of the user MMSI's digits. When you have
entered each of the user MMSI's digits, a confirmation screen
appears.
entered each of the user MMSI's digits, a confirmation screen
appears.
6.
If the displayed user MMSI is correct, rotate PUSH/SELECT to select YES, then press
PUSH/SELECT to confirm it. The setup menu appears.
PUSH/SELECT to confirm it. The setup menu appears.
Otherwise, If the displayed user MMSI is not correct, rotate PUSH/SELECT to select NO,
then press PUSH/SELECT to confirm it. Then repeat Steps 4 and 5 to enter the correct
user MMSI.
then press PUSH/SELECT to confirm it. Then repeat Steps 4 and 5 to enter the correct
user MMSI.
Setting a Scrambler Code
You can set the scrambler code to any of 32 different settings.
Important: You must install an optional scrambler board in the radio to use the scrambler.
See “Using the Scrambler” on Page 24 for more information.
See “Using the Scrambler” on Page 24 for more information.
1.
Rotate PUSH/SELECT to select SCRAMBLE, then press PUSH/SELECT to select it.
A screen appears where you can select a scrambler code.
A screen appears where you can select a scrambler code.
2.
Rotate PUSH/SELECT until the scrambler code you want (01-32) appears, then press
PUSH/SELECT to select it. A confirmation screen appears.
PUSH/SELECT to select it. A confirmation screen appears.
3.
If the displayed scrambler code is correct, rotate PUSH/SELECT to select YES, then
press PUSH/SELECT to confirm it.
press PUSH/SELECT to confirm it.
Otherwise, if the displayed scrambler code is not correct, rotate PUSH/SELECT to select
NO, then press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to enter the correct
scrambler code.
NO, then press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to enter the correct
scrambler code.
Using the System Menu
The radio's system menu lets you set the radio to your own personal preference. To set the
system options, rotate PUSH/SELECT to select SYSTEM, then press PUSH/SELECT to
select it.
system options, rotate PUSH/SELECT to select SYSTEM, then press PUSH/SELECT to
select it.
Adjusting the Contrast
1.
Rotate PUSH/SELECT to select CONTRAST, then press
PUSH/SELECT to select it. A screen similar to the following appears.
PUSH/SELECT to select it. A screen similar to the following appears.
2.
Rotate PUSH/SELECT clockwise to increase the contrast or counter-
clockwise to decrease it. When you have set the contrast level you
want, press PUSH/SELECT to select it.
clockwise to decrease it. When you have set the contrast level you
want, press PUSH/SELECT to select it.
Adjusting the Display and Key Brightness
1.
Rotate PUSH/SELECT to select LAMP ADJUST, then press PUSH/SELECT to select it.
A screen showing the brightness levels appears.
A screen showing the brightness levels appears.
2.
Rotate PUSH/SELECT to select the brightness level you want. When you have set the
brightness level you want, press PUSH/SELECT to select it.
brightness level you want, press PUSH/SELECT to select it.
USER MMSI
685749638
685749638
16
YES
NO
NO
CONTRAST
16