Uniden 260 Manual Do Utilizador

 Transmission power can be set to either 

5W or 1W.  
Press the 1/5W button to make the 
change, then the 5W or the 1W indicator on 
the display changes accordingly.

 To transmit, press and hold the PTT (push-

to-talk) key.  
TX appears on the display.

 To return to receive, release the PTT key.  

TX disappears from the display.

•  If the PTT key is pressed for more than 5 minutes, TX starts 

blinking and the transmission ends. The TX time out tone will 
sound until the PTT key is released.

•  If the battery indicator drops to the blinking 1-mark level on the 

display and the PTT key is pressed, the radio will not transmit 
and the TX icon starts blinking. (Refer to the description of the 
Battery Indicator on the next page.)

To light the display, press any key excluding the PTT key.

•  If you press any button other than the PTT key while the display 

and keypad are illuminated, it remains illuminated for another  
5 seconds.

Your radio emits a beep each time one of the buttons (except for 
the PTT and LOCK key) is pressed.

To turn off or reactivate the Key beep:
Turn the radio on again while pressing and holding the s or t  
buttons.

16

Atlantis 260CE.indd   16

6/3/08   4:51:14 PM