Vertex Standard VX-2R Manual Do Utilizador

Wide FM Low-Scale S-1 Adjustment (S1)
r

Press the [V/M] key.

r

Adjust the generator level to 0 dBµ (1 kHz tone @ ±20

kHz deviation), then press the [F/W] key.

r

Press the [F/W] key again, then press the [V/M] key.

r

Rotate the DIAL knob to select the next setting.

Wide FM S-Meter Full-Scale Adjustment (S9)
r

Press the [V/M] key.

r

Adjust the generator level to +20dBµ (leaving the

modulation level unchanged from the previous step),

then press the [F/W] key.

r

Press the [F/W] key again, then press the [V/M] key.

r

Rotate the DIAL knob to select the next setting.

TX High Power (Low Band Edge @6.0 V) Adjustment (HHP)
r

Set the DC power supply voltage to 6.0 V.

r

Press the [V/M] key.

r

Transmit, and adjust the output power level for 3.0 W

(±0.2 W) by rotating the DIAL knob, then press the

[V/M] key.

r

Rotate the DIAL knob to select the next setting.

TX High Power (Low Band Edge @4.4 V) Adjustment (LHP)
r

Set the DC power supply voltage to 4.4 V.

r

Press the [V/M] key.

r

Transmit, and adjust the output power level for 1.5 W

(±0.1 W) by rotating the DIAL knob, then press the

[V/M] key.

r

Rotate the DIAL knob to select the next setting.

TX Low Power (Low Band Edge) Adjustment (LP)
r

Press the [V/M] key.

r

Transmit, and adjust the output power level for 0.1 W

(±0.05 W) by rotating the DIAL knob, then press the

[V/M] key.

r

Rotate the DIAL knob to select the next setting.

TX Deviation (Low Band Edge) Adjustment (dEV)
r

Press the [V/M] key.

r

Inject a 1 kHz audio tone at a level of 50 mV (rms) to

the MIC jack, then press the [F/W] key.

r

Transmit, and adjust the deviation for ±4.2 kHz (±0.2

kHz) by rotating the DIAL knob, then press the [V/M]

key.

r

Rotate the DIAL knob to select the next setting.

r

Press the [V/M]] key.

r

Transmit, and adjust the deviation for ±0.6 kHz (±0.05

kHz) by rotating the DIAL knob, then press the [V/M]

key.

r

Rotate the DIAL knob to select the next setting.

r

Press the [V/M] key.

r

Transmit, and adjust the deviation for ±0.6 kHz (±0.05

kHz) by rotating the DIAL knob, then press the [V/M]

key.

r

Rotate the DIAL knob to select the next setting.

r

Press the [V/M] key.

r

Transmit, and adjust the deviation for ±0.6 kHz (±0.05

kHz) by rotating the DIAL knob, then press the [V/M]

key.

r

Rotate the DIAL knob to select the next setting.

DCS Tone Deviation (Low Band Edge) Adjustment (dCS)
r

Press the [V/M] key.

r

Transmit, and adjust the deviation for ±0.6 kHz (±0.05

kHz) by rotating the DIAL knob, then press the [V/M]

key.

r

Rotate the DIAL knob to select the Menu Item “HHP,”

then press the [F/W] key.

TX High Power (High Band Edge @6.0 V) Adjustment (HHP)
r

Set the DC power supply voltage to 6.0 V.

r

Press the [V/M] key.

r

Transmit, and adjust the output power level for 3.0 W

(±0.2 W) by rotating the DIAL knob, then press the

[V/M] key.

r

Rotate the DIAL knob to select the next setting.

TX High Power (High Band Edge @4.4 V) Adjustment (LHP)
r

Set the DC power supply voltage to 4.4 V.

r

Press the [V/M] key.

r

Transmit, and adjust the output power level for 1.5 W

(±0.1 W) by rotating the DIAL knob, then press the

[V/M] key.

r

Rotate the DIAL knob to select the next setting.

TX Low Power (High Band Edge) Adjustment (LP)
r

Press the [V/M] key.

r

Transmit, and adjust the output power level for 0.1 W

(±0.05 W) by rotating the DIAL knob, then press the

[V/M] key.

r

Rotate the DIAL knob to select the next setting.