Kenwood TK-2170 Manual Do Utilizador
26
S
CAN
R
EVERT
The Revert zone and channel/ group ID is the zone and
channel/ group ID which the transceiver automatically selects
when pressing the PTT switch during Scan, to transmit. Your
dealer can program 1 of 6 types of Scan Reverts for your
transceiver:
channel/ group ID which the transceiver automatically selects
when pressing the PTT switch during Scan, to transmit. Your
dealer can program 1 of 6 types of Scan Reverts for your
transceiver:
•
Last Called: The last zone and channel/ group ID received is
assigned as the new revert zone and channel/ group ID.
assigned as the new revert zone and channel/ group ID.
•
Last Used: The last zone and channel/ group ID responded to is
assigned as the new revert zone and channel/ group ID.
assigned as the new revert zone and channel/ group ID.
•
Selected: The last zone and channel/ group ID selected is
assigned as the new revert zone and channel/ group ID.
assigned as the new revert zone and channel/ group ID.
•
Selected + Talkback: If the zone and channel/ group ID has
been changed during Scan, the newly selected zone and
channel/ group ID is assigned as the new revert zone and
channel/ group ID. The transceiver “talks back” on the current
receive channel/ group ID.
been changed during Scan, the newly selected zone and
channel/ group ID is assigned as the new revert zone and
channel/ group ID. The transceiver “talks back” on the current
receive channel/ group ID.
•
Priority: If your dealer has programmed the Priority channel, this
channel is the revert zone and channel.
channel is the revert zone and channel.
•
Priority + Talkback: If your dealer has programmed the Priority
channel, this channel is the revert zone and channel. The
transceiver “talks back” on the current receive channel.
channel, this channel is the revert zone and channel. The
transceiver “talks back” on the current receive channel.
Note: “Priority” and “Priority + Talkback” are not available for
Trunking Systems.
Trunking Systems.